dpansier
Well Known Member
I have developed a external mount aircraft antenna specifically tuned to the APRS frequency. The antennas are DC grounded and have a internal impedance matching network to provide very low VSWR. I have both straight and bent element models for top or belly mounting.
I'm looking for a two people that can quickly mount the antennas and provide some test feedback. The mounting will require drilling three holes in the aircraft and the RF connection is a BNC female.
The antennas test very good in the lab but would like to get some airborne results as I do not have my RV-7 complete.
If you have interest please click on the web link below, go to the contact page and click on the email.
Thanks,
I'm looking for a two people that can quickly mount the antennas and provide some test feedback. The mounting will require drilling three holes in the aircraft and the RF connection is a BNC female.
The antennas test very good in the lab but would like to get some airborne results as I do not have my RV-7 complete.
If you have interest please click on the web link below, go to the contact page and click on the email.
Thanks,