I am having trouble getting the pins that came in the empennage kit for the trim servo inserted into the Molex connector. They go in fine but not far enough to click into place, and those little tiny wires don't make a great platform for pushing the pins with much force.
Probably, I screwed up the crimping by using a cheap tool, and the imperfectly crimped pins are interfering with their own insertion into the connector. I bought a better crimper for future use. But I can't figure out precisely what to order or from where, to get replacement pins. I ordered some from Aircraft Spruce but they are way too big.
Any tips on either inserting the pins into the connector or finding replacement pins? Thanks in advance!
Probably, I screwed up the crimping by using a cheap tool, and the imperfectly crimped pins are interfering with their own insertion into the connector. I bought a better crimper for future use. But I can't figure out precisely what to order or from where, to get replacement pins. I ordered some from Aircraft Spruce but they are way too big.
Any tips on either inserting the pins into the connector or finding replacement pins? Thanks in advance!