MonkeyWrench
Member
I was working on my empennage RV-14 and had a question.
I have had people recommended a drop of primer in the pull rivets applied with a twitch (tiny paintbrush).
Tony Bingelis recommends a drop of zinc chromate in each pull rivet.
Is there a product a little less hazardous that you might recommend?
I think the key is that it needs to have zinc as the main ingredient.
Maybe something that is not in a spray can.
I need a drop in each pull rivet since they are dissimilar metals.
I thought about using the cortec primer Zenith Aircraft recommends.
But, what specific product would like to know what you recommend.
Rich
RV14
Working on empennage, 8months, 90hr
I have had people recommended a drop of primer in the pull rivets applied with a twitch (tiny paintbrush).
Tony Bingelis recommends a drop of zinc chromate in each pull rivet.
Is there a product a little less hazardous that you might recommend?
I think the key is that it needs to have zinc as the main ingredient.
Maybe something that is not in a spray can.
I need a drop in each pull rivet since they are dissimilar metals.
I thought about using the cortec primer Zenith Aircraft recommends.
But, what specific product would like to know what you recommend.
Rich
RV14
Working on empennage, 8months, 90hr
