What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Skin thickness on side of tailcone RV-14?

L

larrys

Well Known Member
I need to order an access plate and need to know the skin thickness on the side of the tailcone for the RV-14?
Would someone be next to their build and be able to let me know?
Thanks, Larry
 
Larry,

If you look in Section 4 of the plans, you'll find a parts list albeit not complete. In that list the material and thickness is specified.
 
StressedOut said:
Larry,

If you look in Section 4 of the plans, you'll find a parts list albeit not complete. In that list the material and thickness is specified.
Click to expand...

Thanks Art!
I drove to where the plane was and took a measurement. It is .025 where I need to add the access panel.
I am grateful for your help.
Thanks, Larry
 
StressedOut said:
Larry,

If you look in Section 4 of the plans, you'll find a parts list albeit not complete. In that list the material and thickness is specified.
Click to expand...

I went to Troy high school, no wonder you call yourself stressed out! Pack up and move to Colorado, it might help. But you need to hurry from all the other Cal movers. Again, thanks for your help. Let me know if you are in the area. Larry
 
You must log in or register to reply here.
Back
Top