What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

G3X Touch + GTN 625 - No Traffic on 625

bkervaski

bkervaski

Hellloooooooo!
Testing
I have a G3X Touch with a GTN-625, my ADS-B antenna is plugged into the GTX-345R transponder, which sends weather and traffic via CAN-BUS to the G3X Touch (and I assumed other devices).

Shouldn't I have traffic on my GTN-625? The Traffic icon is just disabled.

Thanks for any help :)
 
Last edited:
You have to run the ethernet wires from the 625 to the 345 if you want weather and traffic on the 625.
The CAN bus does not carry weather/traffic, thats 232 feed from the 345.
I'm sure G3Xpert Steve will be along soon to correct me if I'm wrong!
 
Last edited:
I believe GTX-345R provides both IN/OUT ADSB but I am not sure if the traffic will get displayed on both 650/625 and G3X or just G3X. I'll be interested in the confirmation of what gets displayed.
 
Walt said:
You have to run the ethernet wires from the 625 to the 345 if you want weather and traffic on the 625.
The CAN bus does not carry weather/traffic, thats 232 feed from the 345.
I'm sure G3Xpert Steve will be along soon to correct me if I'm wrong!
Click to expand...

Hello Walt,

You are correct that the bi-directional Ethernet wiring between the GTX 345/345R/45R and the GTN serves two purposes.

One, the ADS-B Out compliant GPS position data provided by the GTN is transmitted to the GTX over Ethernet.

Two, the ADS-B traffic/weather received by the GTX is transmitted to the GTN over Ethernet.

Thanks,
Steve
 
You must log in or register to reply here.
Back
Top