Originally Posted by rvator51
Front fin on no 2 is about 1/8 in deep. Used washer in back of no 3 cylinder. All four cylinders run about same temp.
Do the bypass ducts and #2 and #3 will come down big time.
WARNING! Incorrect design and/or fabrication of aircraft and/or components may result in injury or death. Information presented in this post is based on my own experience - Reader has sole responsibility for determining accuracy or suitability for use.
Harmon Rocket II -SDS EFI instalation in work
RV-8 - Flying
1940 Taylorcraft BL-65 -flying