So my wings were built in the 90's and the sheet metal was wrapped with some white film. I am struggling with removing some of it. I have tried MEK, Acetone, Brake Clean, Goo Gone, Kerosene, Shopline JT501, and Aircraft Paint Remover. Nothing touches this stuff. I even took a 3m Scotch Brite Pad to remove the white backing to expose the adhesive layer and the solvents still will not remove it.
I can Scotch Brite it all the way but would prefer a chemical method.
Suggestions?
Thank you,
I can Scotch Brite it all the way but would prefer a chemical method.
Suggestions?
Thank you,