I don't have the G3X yet, but I am planing on the rheostats in the cockpit for various dimming functions.
Can I use 2 different Calibration Tables for the one and same dimmer (10k rheostat) to operate 2 lighting buses with a different calibration curve?
---------------------
Example:
1 dimmer controls lighting of:
-DC reference bus 1 with 2 calibration points
and at the same time:
-PWM bus 1 with 4 calibration points
----------------------
Thanks!
Can I use 2 different Calibration Tables for the one and same dimmer (10k rheostat) to operate 2 lighting buses with a different calibration curve?
---------------------
Example:
1 dimmer controls lighting of:
-DC reference bus 1 with 2 calibration points
and at the same time:
-PWM bus 1 with 4 calibration points
----------------------
Thanks!