Dynon EMS D-10 Checklists

Hello VAF!

I've got a simple question about the Dynon D-10 EMS. Basically, what do I need to be able to connect a computer to it to update the software and create my own checklists, etc? The previous owner didn't do a whole lot in maximizing the functionality of the system.

I see a serial port on the panel that I assume is where I connect the computer via some version of cable?

I've looked at the two manuals and didn't find what I needed.

Thank you in advance from a new RV owner.

Matt

I used to have an EMS-D10 before I switched to Skyview and did my own checklists. As I recall, there is a product support program that you have to download from Dynon that lets you create and upload checklists.