Squeezer issue

Has anybody any advice regarding a slow recoil on the squeezer, 90psi no leaks thanks in advance chaps and have a great weekend spring has arrived here in scotland

https://youtu.be/qY2g6W5ig3o

Had similar issue. I turned out to be one of the small rubber o-rings had cracked. That o-ring can be accessed by taking the air inlet fitting off (unscrew from body). You can then pull out the rod and spring with o-rings on it. Got replacement from local auto parts store.

One of my set holders will hang up slightly when retracting if it is installed incorrectly against the piston. If it retracts slowly after changing yokes I turn the set holder 180 degrees and it works fine. it actually looks wrong to me when it works correctly. Something to try?

Thanks guys ill give them both a shot