Just started working on my 14A empennage and I seem to of already made a mistake... I was match drilling the reinforcement plate to the forward spar and I got to the hole that was supposed to be match drilled to 1/4 inch. Through my reading I've read that for bigger holes it is best to use a unibit to avoid the metal catching and hole distortion. I ended up going too far resulting in the reinforcement plate being chamfered, and the hole on the spar being distorted. Starting to question my choice on using the unibit... Is there anyway to fix/adapt or should I order new parts?
Photos:
https://photos.app.goo.gl/GXVsUT1sHk1Wo5qb9
https://photos.app.goo.gl/qjZohtb7v9Mdw6iw6
Thanks
Jarrett
Photos:
https://photos.app.goo.gl/GXVsUT1sHk1Wo5qb9
https://photos.app.goo.gl/qjZohtb7v9Mdw6iw6
Thanks
Jarrett