Highest time on Grove gear?

Did a condition inspection the other day, airplane is just off phase 1 with almost 50 hours on it.

Torqued the gear leg bolts, and with so little time it still took almost a full turn to get back to 240 in-lbs. Fore and aft outside bolts, both gear legs.

Some suggest the wear will slow now, but I'm curious if anyone is getting close to bottoming out.

I have ~2k hours on my grove gear. Didnt bottom but I had stripped nuts on all the outboard nuts. Went to the NAS nuts seen in other threads.
http://www.vansairforce.com/community/showthread.php?t=84572