VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-8/8A
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #21  
Old 09-26-2006, 03:02 PM
rvbruce rvbruce is offline
 
Join Date: Feb 2005
Location: Merritt Island, Florida
Posts: 66
Default RV-8 status

Been working on wiring and installing avionics for months and months. Got my BMA G4 unit and installed it next to the EFIS/ONE. Panel is complete(except for wiring and SL30 and Xponder install.)
Reply With Quote
  #22  
Old 11-14-2006, 12:25 PM
TeamRV8A TeamRV8A is offline
 
Join Date: Jul 2005
Location: Newcastle Australia
Posts: 17
Default Aussie RV8A Fastback continues



G'Day all,

Our RV8A Fastback continues. As you can see we are still making a couple of modifications. If you have seen our previous post, we have made a little progress following the aft baggage compartment modification for the wheelchair.
I guess some will look at the side of the fuselage and say “what the”? Well this is to give Cliff easier access to the cockpit (door to be fitted soon). Yes aeronautical engineers in Sydney have crunched the numbers, this is not a modification taken lightly.
The aircraft is being designed to be flown by a paraplegic, so hand controls, wheelchair storage and access have been looked at during the entire project.
I am expecting the completion of the door mod by Christmas, then on to the hand control.
This will be similar to a helicopter collective, with a couple of changes. Up down for rudder control with elec trim switch, twist grip throttle and differential brake control. Yep a few hours in this one too.
After all these mods it will still have the same controls for able-bodied pilots. I still prefer the pedals and a throttle quadrant. Sorry Cliff.
Will post again soon

Safe Flying

Mark
Reply With Quote
  #23  
Old 11-30-2006, 01:37 PM
Guy Prevost's Avatar
Guy Prevost Guy Prevost is offline
 
Join Date: Jan 2005
Location: albuquerque, nm
Posts: 1,063
Default Fuselage Arrived!

I finished up the wings last Wednesday. Thanks to Harland and George from Santa Fe for the help hanging the left one when they came and picked up my wing stands.

I've got the wingtip lenses done and the position lights (copies of Jeff Bordelon's) nearly finished. The empennage fiberglass is done with the exception of the HS tips.

More importantly--The fuselage kit arrived last night!!! I had time to rip open the crates and take a bit of a look. I also looked at the plans and instructions. The new RV-8 plans are beautiful works. The instructions for the fuse went from 28 pages to 81! Nice job Van's!

__________________
Guy Prevost
Albuquerque, NM
RV-8a Built, Enjoyed, Sold
Two Kids: Built, Enjoying
RV-10, Bought, Rebuilt, Enjoying
Build / First Flight Video: http://www.youtube.com/watch?v=8f9HXzZT1dE
Build Log: http://websites.expercraft.com/geprevo/

Arguing on the internet is like having a competition to see who can hit a brick wall the hardest. You may win, but you're still an idiot.
Reply With Quote
  #24  
Old 12-02-2006, 10:03 AM
brucegray brucegray is offline
 
Join Date: Apr 2005
Location: DAYTON,NV.
Posts: 59
Default Slow Build a Roll'in

It looked like this Thread needed another update. Its cold in the garage but things are still getting done with family choices and the holidays approaching. I need to finish up the top cover and I'll flip the fuse for landing gear and belly skins.

I need to prep/prime the seat backs still.



Another view of the aft cover on. Enjoy.



I'll post again when something significant happens.

Bruce Gray
RV8 #81745
Reply With Quote
  #25  
Old 03-03-2007, 08:59 PM
briand's Avatar
briand briand is offline
 
Join Date: Mar 2006
Location: Grand Rapids MI
Posts: 741
Default

I know kind of lame but take note of the D#%* gearboxes. They are clecoed in place and ready for riveting tomorrow when my dad comes over. They really sucked but came out real good and fit in place very unlike an OJ glove!



Last edited by briand : 03-03-2007 at 09:01 PM.
Reply With Quote
  #26  
Old 03-14-2007, 04:45 PM
grymtr grymtr is offline
 
Join Date: Jun 2006
Posts: 2
Default Wings are on

Everything came out fine. I'm glad to have this hurdle out of the way.



The complete fun can be seen here:

http://picasaweb.google.com/grymtr8r...55957493666466

Jon Pawlikowsky

Last edited by grymtr : 03-14-2007 at 04:50 PM.
Reply With Quote
  #27  
Old 03-14-2007, 10:25 PM
KTM520guy's Avatar
KTM520guy KTM520guy is offline
 
Join Date: Aug 2005
Location: Texas, where else.
Posts: 448
Default

You are building a plane in you living room!!! You rock!
__________________
RV-8A builder
A&P mechanic
Aviation Plasticized Pigmented Polymer Application Engineer
Reply With Quote
  #28  
Old 03-15-2007, 04:07 AM
DanH's Avatar
DanH DanH is online now
 
Join Date: Oct 2005
Location: 08A
Posts: 6,772
Default

All the interior sheetmetal is done, the new raised turtledeck is done, the modified forward skin and canopy rails are done, forward baggage door is done, and the mount tab strips for 1/4 cowl fasteners are fabricated. Almost time shoot some interior paint.

__________________
Dan Horton
RV-8 SS
Barrett IO-390
Reply With Quote
  #29  
Old 03-15-2007, 04:16 AM
TShort TShort is offline
 
Join Date: Jan 2005
Location: Indianapolis, IN (KUMP)
Posts: 628
Default

How 'bout some pics of the mods (forward skin, rails, turtledeck, etc).

Thomas
__________________
Thomas Short
KUMP - Indianapolis, IN
RV-10 N316JS bought / flying
RV-8 wings / fuse in progress ... still
N329TS (had it, lost it, looking for new number)
Reply With Quote
  #30  
Old 03-15-2007, 04:39 AM
DanH's Avatar
DanH DanH is online now
 
Join Date: Oct 2005
Location: 08A
Posts: 6,772
Default

Thomas,
Nothin along those lines I could show you that's not shown on the Showplanes site: www.showplanes.com
__________________
Dan Horton
RV-8 SS
Barrett IO-390
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:43 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.