VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 03-05-2017, 12:23 PM
Steve Melton's Avatar
Steve Melton Steve Melton is offline
 
Join Date: Apr 2011
Location: Cincinnati, OH
Posts: 1,122
Default 3D printed canopy hinge cover

A friend asked for a RV-14 canopy - top deck hinge cover over the phone but I don't know the design space. I tried to make something that could work but could use some dimensions and advice. The good thing about ABS is that it will not scratch paint. It's a quick 30 minute print.







__________________
Steve Melton
Cincinnati, OH
RV-9A, Superior O-320, roller lifters, 160HP, WW 200RV, dual impulse slick mags, oil pressure = 65 psi, EGT = 1300F, flight hours = 500+ for all

Simplicity is the art in design.

Last edited by Steve Melton : 03-05-2017 at 07:21 PM. Reason: change
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:34 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.