VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-10-2016, 10:07 AM
JDA_BTR JDA_BTR is offline
 
Join Date: Dec 2013
Location: Baton Rouge, LA
Posts: 436
Default Rollbar and Interior Painting

I've just finished section 32, and am staring at the sentence "now is a good time to paint the interior". It all looks so good in AKZO green I wonder.....

Anyway, I'll need to paint the roll bar and the top ledge of the cockpit later on. Is there any pitfall to installing the rollbar before the section 35 work? Same question for the canopy deck installation of page 35-11? I'm pretty sure the brake installation and flap/aileron sections can come safely after these parts. I don't want to install all of section 35 without the rudder/brake work done because I don't want to paint around all that gear.

In the past I've gotten myself in a corner doing things out of order because of a sequencing problem I didn't forsee.....
__________________
<------------------------------------------------->
N1463 seems a good number....
<------------------------------------------------->
Reply With Quote
  #2  
Old 12-10-2016, 03:59 PM
maniago's Avatar
maniago maniago is offline
 
Join Date: Aug 2014
Location: Bowie MD
Posts: 320
Default

I know I'm not a -14 guy, but why paint the interior? Mine is Akzo and will remain Akzo on the inside on purpose (tho truth in advertising, I have a military exterior scheme planned).

More interior paint is just weight, and if you do side panels, carpet etc, what's gonna be seen.....or opposite thought, just beautify those areas that you wont be covering in someway....
__________________
Mani
Bushby Mustang II (building); IO-360B1E, C2YR-BF/F7666-2
Don't be a hater; I'm a cousin with thin wings!
N251Y (res)
Dec2016
Reply With Quote
  #3  
Old 12-10-2016, 08:45 PM
mrhorspwr mrhorspwr is offline
 
Join Date: Aug 2016
Location: Okc, Oklahoma
Posts: 29
Default interior paint

i cant remeber all the section numbers....i painted the fwd part of the interior( fwd of the main spar) after attaching the empenage but before installing all the brake pedals and before shooting on the fwd upper fuse skin. After shooting the instrument panel structure together i primed and painted it before installing it into the aircraft(because its hard to paint all sides of the structure). After installing the instrument panel structure and the upper fuselage decks(along the sides where the canopy closes onto) and also after finishing the baggage area I painted the rest of the interior. After installing the roll over structure i masked everthing off and sprayed it. I thought alot about the best order to paint everything. I didnt want to see any blend areas in my paint. Also i didnt want to have to repaint after riveting on the upper fuse decks. if u give me your email or phone number i can9 email or text u pics to better understand the order.
__________________
Mat -builder assistant
started Rv14 May 2016
emp kit and fuse kit done
wings almost done
canopy done
Reply With Quote
  #4  
Old 12-21-2016, 05:45 PM
Stockmanreef Stockmanreef is offline
 
Join Date: Nov 2012
Location: Midland, mi
Posts: 451
Default

Have you figured out what you are going to do?

I am at the same point and am debating the same thing. I think that I might complete the elevator section first, then paint the interior, then install and paint the roller section.

I need to look at the plans a bit more before pulling the trigger.

ken
__________________
Ken Stockman
Midland, MI
EAA Chapter 1093 member


RV-14 (serial number 140073)
N73XP (at least that # reserved now)
Reply With Quote
  #5  
Old 02-23-2017, 08:37 PM
JDA_BTR JDA_BTR is offline
 
Join Date: Dec 2013
Location: Baton Rouge, LA
Posts: 436
Default

So I ended up with $30 of material from HD and made a plastic box in my shop to paint in; typical with a filter on one side, and a filter/box fan blowing out the barn door. they have this awesome plastic film 4x10' that easily stretches out over the fuselage and the static makes it stick while you get ready to tape it down. Masked off everything but the forward cabin and shot the paint.

I did brush the little pieces on the firewall for the heater flaps and for the bracket I made for the parking brake. Its okay for little things but would look just awful if I had painted the interior that way.
__________________
<------------------------------------------------->
N1463 seems a good number....
<------------------------------------------------->
Reply With Quote
  #6  
Old 02-24-2017, 03:06 PM
Stockmanreef Stockmanreef is offline
 
Join Date: Nov 2012
Location: Midland, mi
Posts: 451
Default

Apparently I am still at the same point as you are. It just got warm enough to paint. Well I was told that it needed to be at least 50 F to paint. Here is a picture of the "paint booth". I pushed the paint up to the back of a smaller paint booth and then built a bigger temporary booth around most of the plane.

__________________
Ken Stockman
Midland, MI
EAA Chapter 1093 member


RV-14 (serial number 140073)
N73XP (at least that # reserved now)
Reply With Quote
  #7  
Old 02-24-2017, 03:10 PM
Stockmanreef Stockmanreef is offline
 
Join Date: Nov 2012
Location: Midland, mi
Posts: 451
Default

Might have to spray one more coat.

__________________
Ken Stockman
Midland, MI
EAA Chapter 1093 member


RV-14 (serial number 140073)
N73XP (at least that # reserved now)
Reply With Quote
  #8  
Old 02-24-2017, 03:13 PM
Stockmanreef Stockmanreef is offline
 
Join Date: Nov 2012
Location: Midland, mi
Posts: 451
Default

I plan to assemble the roller next, paint all the pieces, and then put in place. I will post more pictures when I get it done.
__________________
Ken Stockman
Midland, MI
EAA Chapter 1093 member


RV-14 (serial number 140073)
N73XP (at least that # reserved now)
Reply With Quote
  #9  
Old 02-24-2017, 03:31 PM
Nova RV Nova RV is offline
 
Join Date: Aug 2015
Location: Leesburg, VA
Posts: 131
Default

I put 2 coats on the vertical surfaces and 3 coats on the horizontal areas that will see the most wear.
__________________
Chris Moon

Leesburg, VA
RV-14A kit # 140243
VAF 2017 and 2018 paid
www.mykitlog.com/chrismoon/
Reply With Quote
  #10  
Old 03-16-2017, 08:38 AM
bkervaski's Avatar
bkervaski bkervaski is online now
 
Join Date: Mar 2017
Location: Birmingham, Alabama
Posts: 304
Default

Hey guys, this plus the fiberglass fairing work are the two most concerning steps to the build process for me.

What brand/type paint are you using and how are you applying it? Also, is that just battleship gray?

Do you have any additional pics?
__________________
#140376 RV-14A QB IO-390 Thunderbolt
Reserved: N196
Progress: Finishing Kit
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:39 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.