VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 03-19-2017, 06:40 PM
Louavul's Avatar
Louavul Louavul is offline
 
Join Date: Jan 2005
Location: Rio Communities, NM
Posts: 116
Default Prop Governor Control Cable Routing

I'm installing my prop governor control cable; RV-7, O-360, traditional firewall penetration point.

Curious what others have done with the cable as it wanders between the cabin side of the firewall and the panel mount.

Seems like it wants to lay through one of the lightning hole in the rudder pedal support but that rubs the brake lines yet allows a fairly straight run to the firewall. Could install an Adel clamp and run it above the brake lines or maybe at the end of the support which would clear the lines but possibly "shorten" the cable forward of the firewall. Don't have the gov yet to proof cable lengths.

Just wondering what others have done.

Thanks in advance for your thoughts.
__________________
Steven Hild
Rio Communities, NM USA
RV-7, FWF/Fiberglass, N590SC res

Contributing annually since January 2002
Reply With Quote
  #2  
Old 03-19-2017, 07:54 PM
Smilin' Jack Smilin' Jack is offline
 
Join Date: Jan 2011
Location: Cumming, Georgia
Posts: 823
Default

Yes it does s curve around. I ended up putting a couple more clamps in various spots to keep it from flopping around and rubbing against anything. If it was about 8 inches shorter it would have been perfect.

Jack
__________________
Smilin' Jack
EAA690 /WB4JKY
APRS
Corporate Pilot CFI-AI, MEL
Jack & Anita Hunt
N507H
KJZP Jasper, Georgia
Reply With Quote
  #3  
Old 03-20-2017, 11:22 AM
rzbill's Avatar
rzbill rzbill is offline
 
Join Date: Nov 2005
Location: Asheville, NC
Posts: 2,447
Default

Mine wanted an Adel "out in space" an inch or so above the center rudder pedal bearing support frame.

So, a long bolt, a small Adel and a tube spacer made from aluminum tubing did the duty.
__________________
Bill Pendergrass
RV-7A: Flying since April 15, 2012. 650hrs
YIO-360-M1B, mags, CS, GRT EX and WS H1s & A/P, Navworx
Unpainted, polished....kinda'
My RV Construction Page
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:29 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.