Originally Posted by RepmikeBrown
I'm putting my gears on and have a package of gear leg hardware that has two .308 shoulder bolts. I'm assuming these are for the gear leg. They seem to be about 1/4 short and I'm having a tough time getting them into the holes that are "aligned". I didn't ream the gear leg out, if I missed that step someone let me know. If I'm using wrong hardware please advise.
If it's like the -6, then the shoulder bolts are used to hold the brake flange on at the wheel end.
The upper bolts at the engine mount end are called out as AN5-21A.
EAA Technical Counselor, Airframe Mechanic
RV-6A VSB (Very Slow Build, but almost there!)
Grumman Tiger N12GA - flying
La Cholla Airpark (57AZ) Tucson AZ