Originally Posted by gsxphil
Ive got this bulkhead installed. Its fluted and clecoed in. I havent match drilled and not dimpled yet. I cant seem to get rid of this buckling in the bulkhead. Ive tried fluting. Nothing i do seems to help. Maybe it will fix itself after its match drilled and dimpled. Any thoughts or ideas appreciated. Video attached.
Mine did that too but it's rock solid after riveting.
Estes Park, CO
wirejock at yahoo dot com
Donated 12/01/2017. Plus a little extra.
RV-7A #73391, N511RV reserved (1,800+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.