I seem to be running to to a few areas that need some special attention to complete. The latest spot is the rivet closest to the trailing edge at the top of the rudder. The plans call for a MK-319-BS pop rivet to be put in place.
As you can see from the pictures below, there appears to be no room to get the second one in due to the lack of room. What's baffling to me as in searching this site, it looks like that I'm the only one having trouble with this spot. This makes me believe that I've done something in the wrong order or.....I'm just plain stupid. Both are distinct possibilities!!
The pictures below depict the problem. I expected to have a problem with the last rivet on the bottom side, but this one surprised me.