Thanks Nick, nice job on the harness by the way 👍
You are quite correct with what you say however an issue arises with wiring the control stick grip of choice as you need to run the wires yourself so the male end of the plug would be handy and same goes for the navigation lights.
The other issue I have run into is I need to de-pin the harness plug for the control stick as I can't get it through to the stick even though I notched out the bulkhead holes. So suggestions for future harnesses would be to leave off the control stick wiring plug leaving it free in the bag with its mate and also the navigation light male plug with some pins free in the bag.
Tail Feathers done
Fuselage kit completed.
wings almost complete.
Flaps and ailerons done.
Canopy next. Phew!