VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #11  
Old 05-16-2018, 07:44 AM
TS Flightlines TS Flightlines is offline
 
Join Date: Apr 2010
Location: Ridgeland, SC
Posts: 1,998
Default

Nothing wrong with using aluminum tubing for the brake line to the caliper. Thousands of RV's and others do it, and generally without any problems. Like Walt said, a nice loop, and make sure the line has some straight length before connecting to the caliper. That way the coiled part of the tube will act as a spring to absorb the vibrations. Really good flares are important. Make sure if using .035 wall that you dont over flare and thin the wall. We've seen most of the failures by breaking the flares at the base inside the sleeve. The nut pulls everything up tight, but the tube flexes, and cracks develop.

Yeah we make teflon hoses to replace them, BUT we know there are alot of planes the successfully use aluminum tubing in that area.

Tom
__________________
Tom Swearengen, TS Flightlines LLC
Teflon Hose Assemblies for Experimentals
Proud Vendor for RV1, Donator to VAF
RV7 Tail Kit Completed, Fuse started-Pay as I go Plan
Ridgeland, SC
www.tsflightlines.com
Reply With Quote
  #12  
Old 05-20-2018, 06:44 AM
Christopher Murphy Christopher Murphy is offline
 
Join Date: Feb 2007
Location: colorado
Posts: 756
Default Chatter is from the metal brake lines

The metal brake line is causing the chatter.

Many certified aircraft have metal lines to a bracket close to the brake and then a short flex line to the brake.

Thats how my RV4 is,set up when I dumped the plastic lines supplied by Vans and installed Aluminum lines to the brakes no matter how I configured the loop in the lines I couldnt stop the chatter..until I added the short brake hose..and stainless disks are,a,waist of money..im my opinion.

Cm
__________________
RV-4 "Mr. Twister"
Pitts S1S "Mexican Red" sold and missed
Mr. Twister Airshows
Rocky Mountain Renegades
the mission... have fun.
Reply With Quote
  #13  
Old 05-20-2018, 10:14 AM
BlndRvtr BlndRvtr is offline
 
Join Date: Mar 2009
Location: NE Where
Posts: 182
Default

Hope this isn't a thread hijack, but how do you make the transition from a compression fitting (as used for Nylo-Seal lines) to a AN flared aluminum line? Is there a fitting that is AN on one end and compression style on the other?

Is there another way to transition from nylon to aluminum brake lines without totally replacing the nylon with aluminum?

George
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:28 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.