What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

RV6 ADS-B

jeffjustis

I'm New Here
We have a Nav Worx ADSB IN only unit tied to our GRT Mini in my RV6 (first flight 2010) Last flight noticed traffic was intermittent. A target would display, then disappear only to come back. Definitely abnormal. Still showed metars. I have a Trig unit for ADSB out. Any suggestions?
 
Occasionally see that if

I am at low altitude and the traffic is UAT "out" to the towers --- with the newest uavionix software, do not see any disappearing targets at normal altitudes.

Ron
 
I was at 8000 and 9000 when the traffic disappeared. I've had ADSB in for several years with no problem til now.
 
Do you have the altitude filter turned on, in the Mini? Was the traffic in question very close to the "filter out" altitude?
 
Back
Top