VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 01-10-2007, 08:36 PM
Rick RV-4 Rick RV-4 is offline
 
Join Date: Aug 2006
Posts: 221
Default Part number for stud that holds magnetos

Anyone know the part number (or type of stud) used to hold the right magneto onto the accessory case on an O-360 A1D?

Long story short, I am installing Pmags on my RV-4. The case mounted studs that are used to attach the left mag (which was an impulse mag) will be too long when I use them for the Pmag. The shorter ones on the right side are the correct length. So I plan on removing the two studs on the left side and either using two bolts or two new studs.

If anyone knows the part number for these, or what exact type of bolts would work, please let me know.

Thanks,

Rick
Reply With Quote
  #2  
Old 01-10-2007, 08:47 PM
Mel's Avatar
Mel Mel is online now
 
Join Date: Mar 2005
Location: Dallas area
Posts: 10,123
Default

The Lycoming part number for the shorter stud (5/16-18 x 1-1/2 long) is 31C-12.
The longer one (5/16-18 x 2-3/8 long) is 31C-19.
__________________
Mel Asberry..DAR since last century
A&P/EAA Tech Counselor/Flight Advisor/Nat'l Test Pilot School
Specializing in Amateur-Built and Light-Sport Aircraft
<rvmel(at)icloud.com>
North Texas (8TA5)
RV-6 Flying since 1993, 172hp O-320, 3-Blade Catto (since 2003)
Legend Cub purchased 12/2017
FRIEND of the RV-1
Eagle's Nest Mentor
Recipient of Wright Brothers "Master Pilot" Award
Reply With Quote
  #3  
Old 01-10-2007, 08:48 PM
Radomir's Avatar
Radomir Radomir is offline
 
Join Date: Jan 2005
Location: Charlotte, NC
Posts: 1,518
Default

I believe it's p/n 31C12 -- 5/16"-18 x 1.5"
__________________
Radomir
RV-7A sold
Reply With Quote
  #4  
Old 01-10-2007, 08:51 PM
Rick RV-4 Rick RV-4 is offline
 
Join Date: Aug 2006
Posts: 221
Default

Thanks a million guys!
Reply With Quote
  #5  
Old 10-20-2016, 09:34 PM
JimWoo50 JimWoo50 is offline
 
Join Date: Oct 2005
Location: Chicago sw suburbs
Posts: 374
Default 31C-12-P03

What does the p-03 stand for? There are 3 listings for the 31C-12 all with different p numbers in the ACS catalog and I would like to order the correct part to facilitate the install of my 2nd p-mag to replace my impulse mag.
__________________
Jim Woolard C56
N9855J RV-6 Donated 2017
Reply With Quote
  #6  
Old 10-20-2016, 11:11 PM
chrisbryanolsen chrisbryanolsen is offline
 
Join Date: Oct 2011
Location: Albuquerque
Posts: 82
Default Oversize

The -p indicates the oversize of the stud. The stud is set by tourqe so if the value is not reached before it bottoms or is to short an oversized stud should be used.
__________________
Chris Olsen
N2ZK RV-4 @ KAEG
Dues Paid Nov. 2018
Reply With Quote
  #7  
Old 10-20-2016, 11:32 PM
Larco Larco is online now
 
Join Date: Mar 2005
Location: DVT Phoenix
Posts: 1,071
Default

cad plated steel exhaust studs for lycoming engines - 31c12
http://www.aircraftspruce.com/catalo...lycexhstud.php
These high quality exhaust studs are produced from cad plated steel in 5/16 x 18 standard thread size and are a direct replacement for the Lycoming part number 31C12 stud. These studs DO NOT feature a safety wire hole (refer to p/n 08-06780 for safety wire hole feature).
31C-12-P03 LYCOMING STUD from Aircraft Spruce
http://www.aircraftspruce.com/catalo...s_07-03182.php
31C-12-P03 LYCOMING STUD Factory New Lycoming Studs. ... CAD PLATED STEEL EXHAUST STUDS FOR LYCOMING ENGINES - 31C12. $5.35 ...
Reply With Quote
  #8  
Old 10-21-2016, 06:12 AM
Walt's Avatar
Walt Walt is online now
 
Join Date: Aug 2005
Location: Dallas/Ft Worth, TX
Posts: 4,853
Default

Quote:
Originally Posted by Rick RV-4 View Post
Anyone know the part number (or type of stud) used to hold the right magneto onto the accessory case on an O-360 A1D?

Long story short, I am installing Pmags on my RV-4. The case mounted studs that are used to attach the left mag (which was an impulse mag) will be too long when I use them for the Pmag. The shorter ones on the right side are the correct length. So I plan on removing the two studs on the left side and either using two bolts or two new studs.

If anyone knows the part number for these, or what exact type of bolts would work, please let me know.

Thanks,

Rick
FYI: P-Mag carries them for those folks that need to change to the shorter studs.
__________________
Walt Aronow, Dallas, TX (52F) RV7A, IO360, C/S, 1500+hrs

EXP Aircraft Services LLC
Specializing in RV Condition Inspections, Maintenance, Avionics Upgrades
Dynamic Prop Balancing, Pitot-Static Altmeter/Transponder Certification
FAA Certified Repair Station, AP/IA/FCC GROL, EAA Technical Counselor
Authorized Garmin G3X Dealer/Installer
RV7A built 2004, 1700+ hrs
Website: ExpAircraft.com, Email: walt@expaircraft.com, Cell: 972-746-5154
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:39 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.