Baffles in RV 7 0-320-B2C conical mount
I am installing my baffles and found that the Vans kit accomodates Dynafocal mounts and my Conical mounts wont let the rear bulkhead sit flush with the engine.
Vans say that i need to modify and wondered if any of you have done this and what tools you needed to do it with. I have Dremel, die grinder, files etc.
Thanks in advance for any and all help
=VAF=2018 Donation - and a bit extra for great work!
Empennage RV 7 - Tipper
Fuse nearing completion, Canopy complete
AME reviewed and repaired O-320-Lyc installed