alpinelakespilot2000
Well Known Member
Does anyone already flying a 2-place have any easy-to-access photos of their roll servo installed that they would be willing to post?
I just (finally, after 6+ years) am getting around to installing my servos on my flying-9 and could use a visual of how the brackets provided with the mounting kit fit in relation to the existing bellcrank mounting bracket in the wing. (Specifically, are the a/p brackets used in lieu of the existing bellcrank brackets or in conjunction with them?) The black and white pictures on the Dynon install pages don't help much. A case of where a decent picture will be worth a 1000 words for me, or at least save me from scratching my head for a while.
Thanks for any help!
I just (finally, after 6+ years) am getting around to installing my servos on my flying-9 and could use a visual of how the brackets provided with the mounting kit fit in relation to the existing bellcrank mounting bracket in the wing. (Specifically, are the a/p brackets used in lieu of the existing bellcrank brackets or in conjunction with them?) The black and white pictures on the Dynon install pages don't help much. A case of where a decent picture will be worth a 1000 words for me, or at least save me from scratching my head for a while.
Thanks for any help!
Last edited: