daddyman
Well Known Member
RV'ers,
I did remove my vacuum pump.
The job was not that big. total time to get it off: about 1 hour.
https://drive.google.com/open?id=0BxmITtsLZSmSRGlHOXNOcWF6WGxtczVTVWdYRGJOYk9Gem13
This was the before picture of my engine starboard side.
https://drive.google.com/open?id=1j2G2zt4HylUjrlLxzg9EZz6vCE5gjhjn
Had to build this removal tool first. Sears tools for $7.00 bent using MAP gas for about 4 minutes. Easy.
https://drive.google.com/open?id=0BxmITtsLZSmSbWNieEZxMmRQQXVaQUZta1RlenpzS3FHWHM0
Purchased cover plate from Aircraft Specialities Inc (thanks to AZ GILA for suggestion) . Cost $ 45.00 with gaskets (x2)purchased 2; because if 1 is good 2 is better.
https://drive.google.com/open?id=1qO68F6Nxcp-j8lVLD2KGu-jGShFd3nMw
These came off.
Savings in weight = 5 pounds, 12 oz.
If anyone is interested in purchasing these removed items , PM me
Daddyman
I did remove my vacuum pump.
The job was not that big. total time to get it off: about 1 hour.
https://drive.google.com/open?id=0BxmITtsLZSmSRGlHOXNOcWF6WGxtczVTVWdYRGJOYk9Gem13
This was the before picture of my engine starboard side.
https://drive.google.com/open?id=1j2G2zt4HylUjrlLxzg9EZz6vCE5gjhjn
Had to build this removal tool first. Sears tools for $7.00 bent using MAP gas for about 4 minutes. Easy.
https://drive.google.com/open?id=0BxmITtsLZSmSbWNieEZxMmRQQXVaQUZta1RlenpzS3FHWHM0
Purchased cover plate from Aircraft Specialities Inc (thanks to AZ GILA for suggestion) . Cost $ 45.00 with gaskets (x2)purchased 2; because if 1 is good 2 is better.
https://drive.google.com/open?id=1qO68F6Nxcp-j8lVLD2KGu-jGShFd3nMw
These came off.
Savings in weight = 5 pounds, 12 oz.
If anyone is interested in purchasing these removed items , PM me
Daddyman
Last edited: