Originally Posted by AAflyer
My buddies and I made a group order of these expensive bolts, thinking it was the "smart way to go". They can be installed like blind rivets; you only need access to one side of the material. Seemed too good to be true...and it was. We've discovered,...now that we have the bolts in hand, that they do not fit through the holes! They are about 6/1000 too big.
To ream, or not to ream...that is the question.
Mine where tight but it was because of the build up of paint when I sprayed the inside, I used a reamer by hand and the holes where free without too much effort and a slight bit of persuasion.