RV 14-A and a JD Air canopy Latch
I have a RV 14-A and a JD Air canopy Latch. I looked very carefully at the rivet pattern on my QB Fuselage and the placement of the JD Latch. It looks like one of the forward rivets is a problem with placement. Before I cut the fuselage skin, does anyone have a 1:1 scale drawing of the RV14 and the JD Latch? The JD Air drawing is not to scale and designed for RV7.
Flying after 1200 build hours
New Lycoming IO390 X, HZ CS 2 Blade,
Garmin Dual G3X 460, GTN 625, A/P 507,
GTR 200 and 20 COMM's, 245 audio, GTX 45R
Last 20 years: Commander 114 & PA28