VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-12
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 10-11-2018, 07:13 AM
Awd2gen Awd2gen is offline
 
Join Date: Dec 2013
Location: Frederick, MD
Posts: 26
Default

I've had similar thoughts as the original poster. Not so much as a "How can I work around the LSA requirements" but rather, if the rules changed and I was say in the middle of building a 12iS would I be able to upgrade with say a different power plant and wings or would it require an entirely new build all together..

I love the 12 for the simplicity and its abilities but if I could have 150kts instead of 120kts in the same platform I'd happily accept and make accommodations
Reply With Quote
  #12  
Old 10-11-2018, 12:56 PM
sblack sblack is offline
 
Join Date: Dec 2009
Location: Montreal
Posts: 1,273
Default

Flutter would be the issue here. Not static loads due to skin thickness. In fact in level flight the loads would not really change, you are still flying 1g. If the vans folks cleared the airplane to 120 plus an allowable margin, then that's the envelope. Could it do more without coming apart? Good question. I doubt very much that they looked at it nor was there any reason to.

In the immortal words of Clint Eastwood: "do you feel lucky punk?".
__________________
Scott Black
RV 4, with an engine...and other stuff
VAF dues 2016
Reply With Quote
  #13  
Old 10-11-2018, 05:32 PM
rvbuilder2002 rvbuilder2002 is offline
 
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 7,748
Default

Airplanes are designed to meet many requirements that are influenced by speed.

One of them is flutter, but there are numerous others.

One important one is design considerations for gust loads.
Likely all pilots know that in turbulence, slowing down reduces how rough the ride is. Inversely, the faster you go, the worse the ride is.

Airplanes are designed to tolerate a specific gust load at max structural cruise speed. If you make modifications that change the max. speed capability, but nothing is done to the structure, you would be at risk of structural damage or failure because of gust loading while flying at the higher speed.
__________________
Any opinions expressed in this message are my own and not necessarily those of my employer.

Scott McDaniels
Hubbard, Oregon
RV-6A (aka "Junkyard Special ")
Reply With Quote
  #14  
Old 10-11-2018, 06:36 PM
rocketman1988 rocketman1988 is offline
 
Join Date: Jun 2010
Location: Sunman, IN
Posts: 1,069
Default In other words...

Trust the Engineers
__________________
Bob
Aerospace Engineer '88

RV-10
Structure - 90% Done
Cabin Top - Aaarrghhh...
Doors - Done
On Gear
290 HP Barrett Hung
ShowPlanes Cowl with Skybolts Fitted - Beautiful

Dues Paid 2017,...Thanks DR+
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:51 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.