Wheel pants alignmet ?
I am installing James pants on Vans gear and mount. The gear has toe in defined by the mount and gear factory drilled holes. The fuse is suspended so the gear is in the FLIGHT orientation. My question is, should the pants be skewed to face forward in the flight vector, or just equally squared with the axle direction ? If with the forward flight vector (ie: parrallel to the fuse centerline ), the pants wiil be significantly skewed from the axle nut seating for the outboard retaing bolt. Your thoughts ?
RV-3B flying w/ carb / Pmags / Catto 2b / Steam
RV-4 fastback w/ Superior XP360/AFP/G3X/CPI/Catto3b