Do a search on Cummins spinners on VAF - several threads. Theres a few of us kinda unhappy with Allan and his product due to fit, and in my case, cause the spinner cut outs will only fit the blended airfoil blade - no other CS prop ie mine. He doesnt state this on his website. Apparently you can order it without cutouts and you do that yourself, tho his cutouts are flanged, yours wouldnt be. I dont know if thats an issue.....The front bulkhead plate is also an issue right now, and his communication is poor to nonexistent. Hes told others he only reads his work email once a week......
Shipping to or from AU is about $80 and theres no problem with that. Alan does pack the box well.
If the spinner fits your CS, it is a nice piece of work, no doubt about that.
MustangII (FoldingWing) "Finishing up": IO360B1E,RSA,C2YR-BF/F7666-2,Superior sump,James; 2xHXr,MiniX,EIS,480,327,240,SL30,Navworx; SteamAlt,AS,VSI,WhiskeyCompass
Don't be a hater; I'm a cousin with thin wings!