Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Old 09-27-2018, 08:26 PM
llohrman llohrman is offline
Join Date: Jan 2008
Location: Wichita
Posts: 19
Default F-615 thru F-619 seat rib trim

Anyone remember if they had to trim F-615, F-616 and F-617 (left and right) seat ribs. The aileron push/pull tube rubs on the forward edge of the lightening holes with the stick in the elevator up position. I have trimmed F-618 and F-619 per plans for the control stick weldment but couldn't find anything on the others.
Reply With Quote
Old 09-28-2018, 08:07 PM
DavidAhrens DavidAhrens is offline
Join Date: Feb 2007
Location: Bakersfield, CA
Posts: 52

normal to clearance large lighting holes for slight interference of aileron control tubes, if you need to remove more than 1/8" or so you may want to recheck the mount height of the controls to spar mount bracket.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 11:50 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.