VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 08-07-2018, 12:00 PM
Redline5.9 Redline5.9 is offline
 
Join Date: May 2017
Location: Onanole, Manitoba
Posts: 16
Default 3d printed pushrod drill jig

A couple weeks back I was searching around and came across a post on a 3d printed jig for drilling the rivet holes in the ends of the pushrod tubes. I can’t seem to find it now. If anyone has done it just wondering if you’d be so kind as to part with the design file for it?

Thanks
__________________
Brent Ryz
RV-10 Empennage Build in progress
2017 Dues Paid
Reply With Quote
  #2  
Old 08-07-2018, 02:44 PM
alpinelakespilot2000 alpinelakespilot2000 is offline
 
Join Date: Jan 2005
Posts: 3,455
Default

Perhaps you just want the satisfaction of making one yourself, but if you have access to Harbor Freight you will find one that you probably can't make any cheaper:
https://www.harborfreight.com/self-c...jig-92046.html
Hope this helps.
__________________
Steve M.
Ellensburg WA
RV-9 Flying, 0-320, Catto

Donation reminder: Jan. 2019
Reply With Quote
  #3  
Old 08-07-2018, 03:06 PM
richardf richardf is offline
 
Join Date: May 2015
Location: Johannesburg, South Africa
Posts: 1
Default I think this is what OP is referring to:

http://www.vansairforce.com/communit...4&postcount=13

Kind regards,
Richard
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:24 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.