Throttle mix cables lenght

Engine in its nest it is time to assemble many things
I have a stock vans mix/throttle cables for my superior vertical Induction IO360 (45)
As I am in Brazil things can get complicated if I need to order parts in terms of time and cost, question is gonna fit?
Thanks captains

Hard to say ...

Part of the mixture cable question is the routing you use thru the firewall AND which carb or injection servo you have. I tried routing my mix cable in the spot shown on Vans plans (to a Silverhawk servo, Superior IO-320, vertical induction) and it did not reach. In fact, the longest mixture cable Vans offered (at that time) wouldn't reach. I ended up cutting another hole in the firewall for a more direct route.

Thanks Rupester

I will try to figure it out