Installed earthx ETX680 bat in my RV8. It replaced a B&C bat of comparable size but of half of the performance. The "X" is simply spectacular.
But here is, perhaps, an issue. With the previous bats i would see around -3 or so amps (never really paid a lot of attention however. Today was the maiden flight with the "X" and i saw -11 to -18 throughout the flight. It is about a factor of 10 higher. No warning/caution lights tetc.
My elec system is a B&C 40 amp alt with their attendent regulators erc.
I don't have much of an electrical load, GRT EFIS, LED lites and seat heaters which I turned on and off but didn't get much of a response.
What do hou make of this.
Thx,
Don
But here is, perhaps, an issue. With the previous bats i would see around -3 or so amps (never really paid a lot of attention however. Today was the maiden flight with the "X" and i saw -11 to -18 throughout the flight. It is about a factor of 10 higher. No warning/caution lights tetc.
My elec system is a B&C 40 amp alt with their attendent regulators erc.
I don't have much of an electrical load, GRT EFIS, LED lites and seat heaters which I turned on and off but didn't get much of a response.
What do hou make of this.
Thx,
Don