Zero4Zulu
Well Known Member
I am planning on using a few Breaker type Toggle switches.
I have a fuse block and a small bank of circuit breakers. Two busses so far. Where should I tap into for incoming power to my Breaker toggle switches? Tap into the incoming power to the busses? Or, use an oversize fuse in one of the fuse block stations so the switch would trip easier than a larger fuse?
Thanks for any input.
More questions to come...
Steve
I have a fuse block and a small bank of circuit breakers. Two busses so far. Where should I tap into for incoming power to my Breaker toggle switches? Tap into the incoming power to the busses? Or, use an oversize fuse in one of the fuse block stations so the switch would trip easier than a larger fuse?
Thanks for any input.
More questions to come...
Steve