Sunriver Ken
Well Known Member
I want to change the nose wheel but do not know what the best way to hold the nose off the ground is. In other planes I have tied a 5-gallon bucket to the tail tie-down and then added weight until the nose was off the ground. I am concerned about doing this as the 9A may not be stressed for this.
I have also placed sandbags on the horizontal stabilizer of other type planes but again do not know if this is the best way for the 9A.
Any tips would be appreciated.
I have also placed sandbags on the horizontal stabilizer of other type planes but again do not know if this is the best way for the 9A.
Any tips would be appreciated.