Charles in SC
Well Known Member
Is one of these required? If not what if anything is required?
Thanks
Thanks
Is one of these required? If not what if anything is required?
Thanks
Short answer is that ONLY the equipment called up in the approved installation manual may be used to form an approved installation. No substitutions are allowed.
Thanks, I was questioning this because I have flown a lot of planes in years past that did not have a panel switch panel. They might have them now. I was just wishing I did not have to use up panel space for this.
Thanks, I was questioning this because I have flown a lot of planes in years past that did not have a panel switch panel. They might have them now. I was just wishing I did not have to use up panel space for this.
Is the antenna just for the 121.5 transmission or does it send out the 406 signal as well? I want to use a different antenna for my composite aircraft that does not require a ground plane but want to know what the antenna is being used for.
Short answer is that ONLY the equipment called up in the approved installation manual may be used to form an approved installation. No substitutions are allowed.
It doesn't have to be on the panel. Just has to be within view and reach of pilot.