What is this?

Hi y’all, first time post, so I hope this is the right place to ask this...

My -14 empennage kit arrives on Wednesday, so I’m working through the training kit. I believe its titled “Doc Class Training”. Here is the link to it on Vans: Training Project

Anywhoo, what is this part used for? It doesn’t seem to be used to build the training project? I’m probably missing something completely obvious...

Thanks in advance.

Mike

https://ibb.co/zhv7H79

If you're talking about the L bracket and two sheets, it's a baby practice project. Figure 1 show you the rivet callouts, etc.

wjb said:

If you're talking about the L bracket and two sheets, it's a baby practice project. Figure 1 show you the rivet callouts, etc.

Click to expand...

So its just to practice laying out the rivets ?manually?? (and callouts)

Just wanted to make sure I wasn?t missing something. Thanks!

Yup, non pre punched "old school" ;-)

Welcome to VAF and enjoy your -14!

Welcome , and Congratulations

Beech350guy said:

Hi y?all, first time post, so I hope this is the right place to ask this...

My -14 empennage kit arrives on Wednesday, Thanks in advance.

Mike

https://ibb.co/zhv7H79

Click to expand...

Mike, welcome aboard the good ship VAF

Congrats on the 14!!

Mike S said:

Mike, welcome aboard the good ship VAF

Congrats on the 14!!

Click to expand...

Thank you gentlemen! Been lurking for a long time, and finally had the opportunity to pull the trigger. So many smart people on this board. I?m looking forward to diving in. My toolbox project somewhat resembled a toolbox, so I got that goin? for me

Fly safe y?all

Mike