VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 06-12-2018, 11:06 AM
9erDriver 9erDriver is offline
 
Join Date: Dec 2009
Location: Brookings, SD
Posts: 79
Default Legacy Dynon question

Helping a friend with planning a panel upgrade, he has a preference for the D-series Dynon gear.

Question: with a D180 and D10A installed and networked together via DSUB, can the D10A be made to display EMS information from the 180? If so, how to configure?

Spoke with Steve at Dynon Tech Support, he said yes it is menu configurable, but I don't see where or how.

thanks for your feedback
__________________
Steve Pofahl
A&P Mechanic - KBKX Brookings SD
RV8A N84ME flying
RV9A N249ST sold
Reply With Quote
  #2  
Old 06-12-2018, 03:28 PM
flyinga flyinga is offline
 
Join Date: Dec 2007
Location: Fredericksburg, TX
Posts: 500
Default

Hi Steve,

Yes it can; that's the setup I have in my RV8. I'm not sure about your configuration question. I usually run with the attitude and engine displays on the D180 and the HSI on the D10A. YMMV
__________________
Jim Averett
RV-8
TS36 - Silver Wings
Fredericksburg, TX
Reply With Quote
  #3  
Old 06-12-2018, 07:36 PM
9erDriver 9erDriver is offline
 
Join Date: Dec 2009
Location: Brookings, SD
Posts: 79
Default Thanks

Thank you Jim!
__________________
Steve Pofahl
A&P Mechanic - KBKX Brookings SD
RV8A N84ME flying
RV9A N249ST sold
Reply With Quote
  #4  
Old 06-13-2018, 10:47 AM
Jesse's Avatar
Jesse Jesse is offline
 
Join Date: May 2005
Location: X35 - Ocala, FL
Posts: 3,442
Default

You have to go into setup on the D180 and page through until you see DSAB. Then detect the DSAB devices and it should just work. Make sure the blue and green DSAB wires are going between the devices.
__________________
Jesse Saint (Saint Aviation, Inc. - VAF Advertiser)
352-427-0285
jesse@saintaviation.com
RV Hotel (hangar, room, car) at X35 in north FL

Commercial ASEL/S A&P/IA EAA Technical Counselor

Dynamic Prop Balancing, Prebuy Inspections, Condition Inspections, Repairs and Mods, Injector Tuning, Airframe, Engine, Panel Upgrades, Ferrying, etc.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:56 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.