Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Go Back   VAF Forums > Model Specific > RV-7/7A
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 09-15-2013, 03:03 AM
JurgenRoeland JurgenRoeland is offline
Join Date: Oct 2010
Location: Belgium, Geraardsbergen
Posts: 102
Default Garmin GSA28 servo compatibility ?


After searching, I couldn't find much information on the mounting scheme for the garmin GSA28 autopilot servo's.

I switched my efis ideas from Dynon to Garmin G3X but already bought the autopilot servo mounting kit roll and pitch from dynon.
Just finished matchdrilling the af fuselage and thought it woul dbe a good idea to install the autopilot mount bracket for pitch control.

So the question is, do garmin servo's use the same groundplate layout as Dynon and is it safe to use the dynon installation kit to use with the garmin GSA28 servos. I know they are compatible with trutrak but don't find any info on Dynon.

thanks in advance
Jurgen Roeland
RV7 builder Belgium
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 01:32 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.