I'm going to be putting my Cormant CI 122 comm antennas under the rear seats (2nd from most outboard bay on both sides). I'm going to be using RG400 coax and was wondering how much separation I need, if any, from standard wiring. I want to run conduits fore and aft straight from the rear baggage bulkhead to under the front of the rear seat footwell under the torque tubes as Mike Starkey has described so it seems inevitable that the antenna coax will have to be in some proximity to the power wires.
Is routing the coax up the tunnel a good option?
Is routing the coax up the tunnel a good option?