Freightdawg
Well Known Member
We (and by "we" I mean my wife) have the wingtips for our RV-10 cut back and ready for the inserts from AeroLED. The instructions call for using 2x48 inch 5oz bidirectional fiberglass to glass in the inserts. I have searched high and low and can't find anything that matches that description. The closest i've come is 8.7 ounce.
For those of you who have installed the inserts necessary for the -10 and -14, what did you use? And did you use the milled glass in the epoxy?
If you have any other tips or tricks, we (and by "we" I mean we) are open to suggestions.
Thanks.
Jeff
For those of you who have installed the inserts necessary for the -10 and -14, what did you use? And did you use the milled glass in the epoxy?
If you have any other tips or tricks, we (and by "we" I mean we) are open to suggestions.
Thanks.
Jeff