I searched and found no problems with 49-12 and yet I cannot mount the oil cooler. I installed the K1000-08 nut plates as directed. The AN525-10R10 screw does not seem to fit into the nut plate. Perhaps I have the wrong screw. OR
the K1000-08 nut plate needs a #8 screw
the AN525-10R10 is a #10 screw
Not sure what is going on here.
Should an AN525-10R10 screw work with a K1000-08 nut plate?
Thanks,
Jeff
the K1000-08 nut plate needs a #8 screw
the AN525-10R10 is a #10 screw
Not sure what is going on here.
Should an AN525-10R10 screw work with a K1000-08 nut plate?
Thanks,
Jeff