VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 12-01-2017, 06:35 PM
falconer falconer is offline
 
Join Date: Aug 2017
Location: Helena, AL
Posts: 9
Default another newbie

received the empennage kit as well as the airfoil pratice kit from Vans. One quick question on how to dimple the holes located near the trailing edge. I can dimple all of the holes except for the last couple of holes. How are they dimpled?

Reply With Quote
  #2  
Old 12-01-2017, 06:45 PM
terrye terrye is offline
 
Join Date: Feb 2010
Location: Vancouver, BC, Canada
Posts: 699
Default Csk rib TE

There are a number of different ways/tools to do this. One is a pull type countersink die, another is a cantilever type countersink die. Us the SEARCH utility, you'll find lots of references to this. Also have a look on the tool supplier's websites such as Cleaveland and look on their videos.
__________________
Terry Edwards
RV-9A (Fuselage)
2018/2019 VAF Contribution Sent
Reply With Quote
  #3  
Old 12-01-2017, 06:52 PM
Captain Avgas Captain Avgas is offline
 
Join Date: Oct 2005
Location: Melbourne, Australia
Posts: 1,659
Default

Everything you need to know is in this thread from the archives.

http://www.vansairforce.com/communit...ad.php?t=84988

The archives are your friend.
__________________
Regards
Bob Barrow
RV7A
Reply With Quote
  #4  
Old 12-01-2017, 07:16 PM
Mudfly Mudfly is offline
 
Join Date: Dec 2011
Location: Alpharetta, Ga
Posts: 149
Default Welcome

Welcome Falconer!
Prepare for an experience
I don't remember how I dimpled those particular holes, but I may have used these..http://www.aircraftspruce.com/catalo...?clickkey=9213
Shawn
__________________
Shawn Edwards
RV-14A (140174)
www.myrv14build.blogspot.com
Reply With Quote
  #5  
Old 12-01-2017, 07:35 PM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 14,280
Default Welcome to VAF

William, welcome aboard the good ship VAF
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #6  
Old 12-03-2017, 04:22 PM
bkervaski's Avatar
bkervaski bkervaski is offline
 
Join Date: Mar 2017
Location: Birmingham, Alabama
Posts: 770
Default

William,

We are just about neighbors, PM'd you my info. I'm done with the airframe components sans fitting canopy.

Would love to meet you!
__________________
#140376 RV-14A QB IO-390 Thunderbolt
Registered: N196
Progress: Away for PAINT
Reply With Quote
  #7  
Old 12-03-2017, 11:43 PM
mturnerb mturnerb is offline
 
Join Date: Apr 2015
Location: Ponte Vedra, FL
Posts: 722
Default

Enjoy your build. I've used the puller dimple dies (http://www.cleavelandtool.com/3_32-C.../#.WiTuRbSpnUo) but prefer these where I can get access (similar to earlier post):

http://www.cleavelandtool.com/3_32-V.../#.WiTt27SpnUo

I've also used this tool a couple of times: http://www.cleavelandtool.com/Tight-.../#.WiTuarSpnUo
__________________
Turner Billingsley
RV-14A In Progress
N14VB Reserved
https://turnerb14a.blogspot.com/
Reply With Quote
  #8  
Old 12-04-2017, 08:32 AM
Mikeandmaz Mikeandmaz is offline
 
Join Date: Sep 2015
Location: England
Posts: 30
Default

In the Practice kit instructions there is a small dimpling bucking bar to make. Once made it makes dimpling the above holes real easy and cost next to nothing. Bolt it to the work bench, slide rib over it then sit the male dimple die over it in the shaft of a C frame. A quick wack with a hammer and dimple formed.
Enjoy
__________________
Empennage arrived
VS completed
Rudder completed
HS completed
Elevators in progress
#140425
Donation paid 2018
Reply With Quote
  #9  
Old 12-04-2017, 12:59 PM
falconer falconer is offline
 
Join Date: Aug 2017
Location: Helena, AL
Posts: 9
Default

Thanks for all of the solutions guys, once again Cleveland Tools has my CC number
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:59 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.