VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-12
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-27-2018, 10:45 PM
Tacco Tacco is offline
 
Join Date: Jan 2017
Location: White Salmon, WA
Posts: 41
Default Drilling Wing Doubler for BSPQ-5 Rivets

Just curious...but Van's just issued this plans change:

"Page 17-02 Rev 2: In Step 4, changed “Final-Drill #22” to “Final-Drill #20.” "

That was a while ago for me and for the life of me I can remember what I did. I checked my drill bit inventory and cant find a #22 so my guess is that I used a 5/32 bit because it was so close to a #22 bit... .156" vs. .157"

My guess is also that the change is to allow for a larger hole so that the rivet properly sets (expands). #20 is about .161" dia.

A BSPQ-5 rivet is .157". I don't remember having any problems inserting these rivets. Perhaps they where already punched pretty close to where they needed to be (?).

Anyone else paranoid about this or...remember what you did?
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:51 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.