VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 04-11-2018, 02:37 PM
Tacco Tacco is offline
 
Join Date: Jan 2017
Location: White Salmon, WA
Posts: 43
Red face Drilling Spinner

Reviewing the KAI before I align and drill the spinner. My spinner is opaque. Is there a trick here? Do you drill the spinner plates first and use magnetic balls to find the holes or what? How did you do it?
Reply With Quote
  #2  
Old 04-12-2018, 03:08 AM
mike newall's Avatar
mike newall mike newall is offline
 
Join Date: Jan 2005
Location: Yorkshire, England
Posts: 1,636
Default

How old is your spinner ?

Ours are translucent green - ish and we could see through just fine to drill. Needed a torch behind though.
__________________
"I add a little excitement, a little spice to your lives, and all you do is complain!" - Q

Donated in 2018
Reply With Quote
  #3  
Old 04-12-2018, 04:33 AM
mwjohn63's Avatar
mwjohn63 mwjohn63 is offline
 
Join Date: Sep 2016
Location: Liberty Township, OH
Posts: 2
Default

There is a good description in the latest section 5 on how to use the magnets (05-18).
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:20 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.