VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 04-11-2018, 04:40 PM
AviatorJ AviatorJ is offline
 
Join Date: Feb 2015
Location: Oklahoma City
Posts: 663
Default Missing K1100-8s?

Part of airplane factory clean up is to go back through the plans and bag up like hardware that will be used in final assembly. For example the wing bolts, washers and nuts all together an labeled in a bag.

I'm looking at the wing assembly attachment section and it has me put about 50 K1100-8 at the fuselage wing roots. Well I have about 14 of them, so I either inadvertently installed 8s somewhere instead of 6s or I didn't get enough. Don't think that's the case because I look at the inventory list and the only K1100-8 are in a bag with 6's and there are only like 25 or so of them...

Curious if anyone with the QB ran into this or did I lose them somewhere?
__________________
Justin
RV-10 Quickbuild 'Avionics and Interior'
http://operationrv10.blogspot.com/
Donated for 2018
Reply With Quote
  #2  
Old 04-11-2018, 05:14 PM
Kyle Boatright Kyle Boatright is offline
 
Join Date: Aug 2005
Location: Atlanta, GA
Posts: 3,287
Default

Nutplates were an item I've run short of a number of times. I also ran short of pop rivets for the floorboards and for attaching the cabin top.
__________________
Kyle Boatright
Atlanta, GA
2001 RV-6 N46KB
2019(?) RV-10
Reply With Quote
  #3  
Old 04-11-2018, 05:15 PM
RDupee RDupee is offline
 
Join Date: Apr 2012
Location: Mass USA
Posts: 15
Default

Same with my QB kit.
I used 8 K1100-8s on the baggage area bulkhead that should have been K1000-8, but had to order 40 K1100-8s for the wing root.
__________________
Rich D

1980 Evans VP1 completed, sold.
1995 Avid Speedwing completed sold.
RV-12 120259 First flight July 2014.
RV-10 kit started Feb 2017.
Reply With Quote
  #4  
Old 04-11-2018, 07:35 PM
Kupde Kupde is offline
 
Join Date: May 2016
Location: Tampa,Fl
Posts: 23
Default

Same here. Had to order about 40 to finish the wings. Must be a kit issue
Reply With Quote
  #5  
Old 04-11-2018, 07:46 PM
rapid_ascent rapid_ascent is offline
 
Join Date: Mar 2008
Location: Dublin, CA
Posts: 918
Default

I had the wrong nut plates delivered with my wing kit. At the time I didn't really know the difference between K1000 and K1100 nut plates. I eventually figured it out and Vans did a swap for me. The cost of these parts does add up if you need 50 or 100 of them.
__________________
Ray Tonks
2018 Donation Paid
RV-7 Fuselage in progress
* Rolled the Fuselage
RV-7 SB Wings
* Both Wings fully skinned
* Fuel Tanks Complete - No leaks finally
* Ailerons Complete
* Flaps Complete
RV-7 Empennage - Complete (a little fiberglass work left)
Vans Training Kit # 2 - Complete
Shop Setup - In Progress (Gathering Tools, Never Complete)
RV-7 Preview Plans
Vans Training Kit #1 - Complete
EAA Sheet Metal Class - Complete
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:30 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.