Originally Posted by azflyer21
Once you're finished with 09-23 rivet those 6 locations as well. I had the same question to Van's, the plans do not explain this very well.
Do you mean after page 09-22 or after page 09-23? By the end of 09-23, the trailing edge and trailing edge ribs are bonded to both skins and the close-out tabs are riveted together, which would prevent getting the special bucking bar into the rear spars. I think it is safe to rivet these last 6 rivets on each elevator between pages 09-22 and 09-23, but donít want to jump the gun.