VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-20-2018, 05:01 PM
JDA_BTR JDA_BTR is offline
 
Join Date: Dec 2013
Location: Baton Rouge, LA
Posts: 553
Default BC410h alternator nut at vacuum pad

That lower left nut seems nearly impossible. Gonna have to take off the right mag to reach it. Even then looks tough. Anybody got a fav tool that made it easier?
__________________
<------------------------------------------------->
N1463 seems a good number....
<------------------------------------------------->
Reply With Quote
  #2  
Old 04-20-2018, 05:04 PM
rvbuilder2002 rvbuilder2002 is offline
 
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 7,500
Default

http://www.aircraftspruce.com/catalo...kaAg_PEALw_wcB
__________________
Any opinions expressed in this message are my own and not necessarily those of my employer.

Scott McDaniels
Hubbard, Oregon
RV-6A (aka "Junkyard Special ")
Reply With Quote
  #3  
Old 04-20-2018, 06:07 PM
JDA_BTR JDA_BTR is offline
 
Join Date: Dec 2013
Location: Baton Rouge, LA
Posts: 553
Default

I like it. Not sure if it is wide enough to get around the alternator?
__________________
<------------------------------------------------->
N1463 seems a good number....
<------------------------------------------------->
Reply With Quote
  #4  
Old 04-20-2018, 06:35 PM
MED MED is online now
 
Join Date: Jul 2015
Location: Aiken, SC
Posts: 231
Default

I was able to reach it after removing the right e-mag. Used an open-end wrench, but had to guesstimate the torque comparing it to the other three.
__________________
MED
140236
N435MD reserved
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:36 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.